Update Galaxy Ace GT-S5830 To Gingerbread 2.3.6 DDKQ8 Firmware

Galaxy Ace GT-S5830 lovers,users and owners of this great device now the is a good news for you, that you can upgrade/update Update Galaxy Ace GT-S5830 To Gingerbread 2.3.6 DDKQ8 Firmware. Below I will give a how to tutorial. This firmware will come with security updates, speed and boost of performance and better battery backup.

This firmware update does not have major update regarding its user interface, but you will find new changes in different places. You can also easily read devanagri scripts as it can render nepali ,hindi, tamil and other idic fonts very well.

Disclamer : This site will not be responsible for anything damages or data loss to your device. This site is only for information purposes only.We have instructions below follow step by step proccess to have a successful installation without causing problems. Proceed at your own risk.

Requirements:

1.  Download Samsung USB drivers here, this will connect your device to pc. If you have installed samsung kies on your pc this drivers are installed automatically no need to install again.

2. Download Odin Mutlidownloader v4.38 here, this is to flash or upgrade firmware.  yagyagaire pass

3. Download Cooper_v1.OPS file here, this is needed each time you flash via Odin  yagyagaire pass

4. Download S5830DDKQ8_S5830ODDKQ7_INU.zip file here

Now the step by step guide or procedure on how to Update Galaxy Ace GT-S5830 To Gingerbread 2.3.6 DDKQ8 Firmware

1. Make sure you have followed all the requirements above.

2. Once download the firmware above, extract and get a single S5830DDKQ8_S5830ODDKQ7_S5830DDKQ8_HOME.tar.md5 file. Extract password is samfirmware.com

3. Run Odin multidownloader for galaxy ace GT-S5830

4. Check 1 packag, auto reboot and protect ops check boxes

5. Click on OPS button and load Cooper_v1.0.ops file.

6. Now go to buttom and click 1 package button

7. Load S5830DDKQ8_S5830ODDKQ7_S5830DDKQ8_HOME.tar.md5 file in One Package field.

8. Once configured the odin Turn off your device.

9. Boot your device in download mode

10. Download mode can be entered by pressing volume down + home + power button simultaneously

11. When your phone is in download mode connect your device to PC using USB cable.

12. Once connected in download mode then odin will say detected and you may press start button

13. Wait for 5-6 minutes for odin to flash the firmware.

14. When odin says PASS at the top left box now you can disconnect your device.

Congratulations now you have succesfully updated/upgraded your device To Gingerbread 2.3.6 DDKQ8 Firmware. Enjoy!